11 Years Manufacturer Die Formed Graphite Ring for Turin Factory

Short Description:

Die formed graphite packing ring is made of pure flexible graphite ,or Graphite with inconel /SS316/Brass wire reinforced.  Performance and Features Perfect self lubricant performance.         High elasticity coefficiency. Scope of Application Working temperature:~200~400℃(200~800℃ under non-oxidation atmosphere) Working pressure:≤35MPa Density:1.4 ~ 1.6 g/cm3


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
11 Years Manufacturer Die Formed Graphite Ring for Turin Factory Detail:

Die formed graphite packing ring is made of pure flexible graphite ,or Graphite with inconel /SS316/Brass wire reinforced.

 Performance and Features

  • Perfect self lubricant performance.        
  • High elasticity coefficiency.
  • Scope of Application

Working temperature:~200~400℃(200~800℃ under non-oxidation atmosphere)

Working pressure:≤35MPa

Density:1.4 ~ 1.6 g/cm3


Product detail pictures:

11 Years Manufacturer
 Die Formed Graphite Ring for Turin Factory detail pictures


Related Product Guide:
What Is A PTFE Ring Gasket?
O-Ring Sizes for Industrial Applications

11 Years Manufacturer Die Formed Graphite Ring for Turin Factory, The product will supply to all over the world, such as: , , ,


  • Can’t find a replacement for that torn ribbon cable; don’t want to pay for a new one – solder splice the two bits – did you save them ?

    PLEASE NOTE: In the making of this video my efforts were necessarily clumsy because I could not take advantage of any magnification directly, especially using the microscope; I had to concentrate on aligning the cam to get a picture, so I was constrained to watching the screen of the VCR, it being too low resolution for productive effort. I would like to have used an eyepiece adaptor that fits both the camcorder and the ‘scope; then I should have been able to peer through the other eyepiece. So be assured it is a great deal easier than I make it look here. I have to admit that relatively few people have access to a stereo microscope; I paid around £180 ( ebay ) for this Russian made Lomo MBC-10, so at least it has been useful apart from being a toy.

    I use a Yihua [ goes under several trade names ] workstation that has a heater blower – like a hair drier but hotter and more concentrated flow of air – and a soldering iron that has, as an accessory, a very fine, needle point bit, allowing you to make a good job of such tiny amounts of solder, almost too small to see with the naked eye.

    The VX1000 mic/remote/cp flexiboard cable is about 1cm wide; with only a “normal” fine point soldering bit 40 joints were made in the space of approx 0.9 sq cm. The much finer bit was/is available as an optional accessory.

    See this video for demonstration of USB microscope: “ToddFun.com: USB Microscope Review”.

    Mario Parodi [ Guitar ] plays:-

    Albeniz: Rumores de la Caleta; SE-Op 165 – Malaguena
    Brahms: Cradle Song Op 49 no 4
    Debussy: Arabesca No 1; SB – Clair de lune


    5 Stars By from -

    5 Stars By from -

    Related Products