18 Years Factory offer PTFE Packing with Aramid Corner to Yemen Factories
18 Years Factory offer PTFE Packing with Aramid Corner to Yemen Factories Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
18 Years Factory offer PTFE Packing with Aramid Corner to Yemen Factories, The product will supply to all over the world, such as: , , ,
Substitution of mechanical seal, O-ring, screws on sleeve version of Lowara e-HM plastic impellers. Valid for e-HM models: 10 HM up to 6 stages.
For more information: https://lowara.xylemappliedwater.com/brands/lowara/multistage-pumps/e-hm/
The content of this video is a guide and must be installed by a qualified person in accordance with all relevant local Electrical and Water Supply Regulations.
By from -
By from -
