Manufacturer of Spiral Wound Gasket-R for Oman Manufacturers
Manufacturer of Spiral Wound Gasket-R for Oman Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
Manufacturer of Spiral Wound Gasket-R for Oman Manufacturers, The product will supply to all over the world, such as: , , ,
Toolfusion® 3 is a two part low viscosity epoxy infusion resin formulated to produce pre-preg quality, composite moulds. Toolfusion® 3 has a low initial cure temperature of 120ºF (49ºC) and can be post cured to achieve a high glass transition temperature of 425ºF (218ºC). Void contents of less than 1% are achievable. Toolfusion® 3 will work in various RTM and VARTM processes including single and double bag arrangements to produce autoclave quality laminates.
Benefits:
• Resin infusion process delivers very high quality laminates with low manufacturing costs, no refrigeration costs, no autoclave running costs.
• Low initial cure temperature for low thermal expansion effect during curing and ability to use low cost master model materials.
• Nano technology delivers outstanding toughness & high Tg. (218ºC) for long tool life and reduced life cycle cost.
• Low viscosity allows infusion of thicker and more complex laminates with fewer resin feed lines.
• In comparison to metallic tools, Toolfusion® 3 composite tools are lighter weight for easier manual handing.
• In comparison to metallic tooling, Toolfusion® 3 composite tools have faster heat up and cool down rates for reduced production costs.
• Toolfusion® 3 composite tooling laminates have vacuum integrity for vacuum bag processing of parts in oven and autoclave.
For more information, please visit: www.airtechonline.com
By from -
By from -
