High reputation for PTFE Braided Gland Packing for Denmark Importers
High reputation for PTFE Braided Gland Packing for Denmark Importers Detail:
Braided with 100% expanded PTFE, soft character, super fiber strength, ideal abrasion resistant material.
Special porous structure of the fiber can better absorb and reserve lubrication and heat conductive agent useful for the sealing of packing to assure of consistency of lubrication and heat conductive agent, great reduction of possibility of efficacy loss. Much better meets demands of rigid using conditions.
With the exception of very few chemicals, resists almost medium.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
2Mpa |
15Mpa |
20Mpa |
Shaft Speed |
10m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.
It is particularly recommended for sugar and chocolate processing, and fine paper production.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
High reputation for PTFE Braided Gland Packing for Denmark Importers, The product will supply to all over the world, such as: , , ,
Vetaphone and Coating Plasma Industrie demonstrates the EASI-Plasma system for surface treatment of films and foils.
Vetaphone’s EASI-Plasma system works on the same principles as a Corona system, but by replacing the oxygen with gases or monomers, the EASI-Plasma can create new and innovative abilities on the film surface. The EASI-Plasma system does this with a significantly lower amount of consumables than any other solution on the market.
Benefits of EASI-Plasma
• Higher and longer lasting dyne values
• Replace your primer or coating unit with a cheaper solution
• Nano-coating thickness only 5-50 nm
• Anti-fog
• Hydrophilic or Hydrophobic surface
• A large variety of other abilities
EASI-Plasma provides a wide range of benefits for the coating and converting processes; such as nano-coating, anti-fog properties, low surface ageing and higher dyne levels.
EASI-Plasma reduces production costs by eliminating the need to use expensive primer, so the cost per m2 is reduced significantly. As the layer of primer is not needed, it is possible to produce much thinner film.
Similar advantages are present, when using the EASI-Plasma for nano-coating. By making the nano-coated layer only 5-50 nm thick, the EASI-Plasma brings down the cost per m2 and creates possibilities to produce new innovative thinner films.
All in all there is a great potential for saving resources and creating new surface abilities by employing EASI-Plasma.
Shijiazhuang Beike Sealing Technology Co.,Ltd. specializes in rubber sealing field, main products: o-ring, x-ring, square ring, gasket/washer, stopper, bellow, …
By from -
By from -