Reliable Supplier PTFE Graphite Packing with Aramid Corner to Qatar Importers
Reliable Supplier PTFE Graphite Packing with Aramid Corner to Qatar Importers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
Reliable Supplier PTFE Graphite Packing with Aramid Corner to Qatar Importers, The product will supply to all over the world, such as: , , ,
A4000 & Wrightlon® 5200 are high temperature, fluoropolymer release films that have excellent elongation and will conform easily to the most complex curvatures.
They are capable of cure temperatures up to 500°F (260°C). These films will release from most resin systems and will provide a glossy finish when used directly on the laminate.
All standard perforations are available. Please see our perforation table in the “Release Films” film section of the catalog.
Benefits:
• Excellent elongation and strength reduces bridging in corners, avoiding scrap or rework.
• High visibility colors reduce risk of FOD and leaving film on cured parts.
• Color options help differentiate perforation styles.
• Easy release off cured parts, leaving excellent finish.
• Widths up to 160 inches (4 m) without heat seams.
For more information, please visit: www.airtechonline.com
By from -
By from -
