100% Original Factory PTFE Graphite Packing with Aramid Corner Supply to British
100% Original Factory PTFE Graphite Packing with Aramid Corner Supply to British Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials
100% Original Factory PTFE Graphite Packing with Aramid Corner Supply to British, The product will supply to all over the world, such as: , , ,
How to re-caulk a inground pool deck. Removing the old caulk, I used a 5-1 painters knife. The backer rod/ caulk saver foam was from Lowes (in the weather strip area) and the size I used was 5/8″ (will vary based on crack size) . The caulk also came from Lowes in the concrete section. Some small areas did leak through causing a hole or gap. the next day I skimmed a little latex caulk over the hole then after it dried added another coat of the self leveling caulk to cover the latex caulk.
By from -
By from -
