Discount Price Expanded PTFE Tape to Florida Manufacturer
Discount Price Expanded PTFE Tape to Florida Manufacturer Detail:
Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.
Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.
Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.
l Easy use and replacement
l Wide service scope.
Technical Data Sheet
|
No.
|
Project |
Technical Indexes |
|
1 |
PH Range |
0-14 |
|
2 |
Density |
0.7-0.8g/cm3 |
|
3 |
Temperature resistance |
-260-+260℃ |
|
4 |
High pressure resistance |
20~25Mpa |
|
5 |
Elongation |
20~30% |
|
6 |
Tensile strength |
30~35Mpa |
Regular Size
|
NO. |
SIZE |
NO. |
SIZE |
|
1 |
3mm*1.5mm*30m |
15 |
16mm*4mm*10m |
|
2 |
3mm*2mm*30m |
16 |
20mm*3mm*5m |
|
3 |
6mm*3mm*20m |
17 |
20mm*4mm*5m |
|
4 |
7mm*2.5mm*20m |
18 |
20mm*5mm*5m |
|
5 |
9mm*3mm*15m |
19 |
20mm*7mm*5m |
|
6 |
9mm*4mm*15m |
20 |
25mm*4mm*5m |
|
7 |
10mm*3mm*10m |
21 |
25mm*5mm*5m |
|
8 |
10mm*4mm*10m |
22 |
25mm*8mm*5m |
|
9 |
10mm*5mm*10m |
23 |
25mm*10mm*5m |
|
10 |
12mm*3mm*10m |
24 |
30mm*3mm*5m |
|
11 |
12mm*4mm*10m |
25 |
30mm*4mm*5m |
|
12 |
12mm*5mm*10m |
26 |
40mm*4mm*5m |
|
13 |
12mm*6mm*10m |
27 |
50mm*4mm*5m |
|
14 |
14mm*5mm*10m |
28 |
100mm*0.5mm*10m |
Application Area
It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
What Is A PTFE Ring Gasket?
Discount Price Expanded PTFE Tape to Florida Manufacturer, The product will supply to all over the world, such as: , , ,
How to remove, clean, and reinstall the throttle body on a 4.2 inline 6 trailblazer.
This procedure is usually done if the engine idles rough or stalls with the a/c or defrost on AFTER the battery has been disconnected.
I also show an alternate method for resetting the pcm. (I found this tip in a post by mwfaith1971 on trailvoy)
Update 3/1/12 – Frequently asked questions:
Q- why do you pull those fuses?
A- to reset the pcm WITHOUT disconnecting the battery
Q- why don’t you disconnect the battery?
A- that could potentially cause hvac actuator failure, moreso in the older ones like my 03…YOU can reset the pcm however you want to in yours:)
Q- can I pull the fuses and then clean the throttle body?
A- absolutely!
Edit 7/2014 – Sorry looks like I have to close comments on this one. Too many peeps trying to promote their shitty channels and giving horrible advice. I’ve probably done this procedure more times then all of you assholes combined so I think I know what the fuck I’m talking about. Thanks for letting me know how much I suck, 169,000 peeps will tell you otherwise.
By from -
By from -
