OEM Factory for Spiral Wound Gasket-CG to Iraq Manufacturers

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

Technical Data Sheet

Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.

The automatic tape machine applies a double-sided, self-adhesive tape on tubes for (roller) blinds. Positional control allows the distance between the tube end and the tape to be specified precisely at both ends in order to match the tape position with the fabric width and position. This prevents pollution at the tube ends caused by exposed tape.
The tube taping machine can be made compatible with multiple tube diameters, and switching between the diameters is very simple. The tube tape machine featured in the video is suitable for different tape widths, and uses a jumbo tape roll dispenser. The machine includes a feeding tray for tubes, and a collection crate in which the tubes are ejected. The operator sets the system to the correct tube diameter and only needs to place the tubes in the loading system. During transport, the tubes are de-greased using a solvent dispenser and wiping system, followed by the actual application of the tape. Transport, cleaning, taping and ejecting are done fully automatic.