15 Years Manufacturer Spiral Wound Gasket-CG for Jamaica Manufacturers
15 Years Manufacturer Spiral Wound Gasket-CG for Jamaica Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
15 Years Manufacturer Spiral Wound Gasket-CG for Jamaica Manufacturers, The product will supply to all over the world, such as: , , ,
semi-automatic tube filling and sealing machine,filler and sealer for tubes,أنبوب ملء وختم الآلة
Any questions,feel free to contact me.
Email:htpmachinery@gmail.com
Skype:zhang.tracy6
More information:https://twitter.com/htpmachinery
Chick here to subscribe us
https://www.youtube.com/channel/UCo4XjYB_mRONyQKah8jbjVw
Specifications
Semi-auto tube filling sealing machine 1.Used for tube package 2.Especially for toothpaste pruducts 3.For tube fill seal
Specification
1.Main machine frame with stainless steel covers
2.AC inverter for main drive for step-less speed variation-
3.Automatic tube hopper with pneumatic system of tube insertion into rotary index table
4.Rotary index table for transferring tubes to filling, closing stations and other sections
5.Tube orientation controlled by photocell for accurate positioning of tubes
6.50 litres capacity stainless steel hopper
7.Stainless steel volumetric dozing syringe and Teflon piston seals for accurate dosage with step-less adjustment of volume
8.Tube lifting at filling station — so that filling nozzle gets inserted inside tube during filling
9.Tail cutting by ‘suck back’ method to prevent dripping of product after filling
10. Hot air tool for plastic / laminated tubes (Leister make heater)
11.PID temperature controller for accurate control of hot air temperature
12.Air supply to air heater through independent blower
13.Batch code embossing facility within sealing jaws (by using negatively etched character type fount)
14. Trimming of plastic / lami tubes at the top end
Automatic tube ejection
Preset counter
No−Tube−No−Fill system
Control sensor for non ejected tubes
Low air pressure switch
Emergency stop
Fixed position machine stop
By from -
By from -
