Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory
Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Useful Tips For Installing The Teflon Envelope Gasket
Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory, The product will supply to all over the world, such as: , , ,
Shifts much better with 10W30 installed.
As usual it’s difficult to get oil back into the manual transmission without a proper pump. Jeep design makes it handy to just pour oil in with a longer hose while standing beside front fender.
Used a 90 degree fitting from Lowes that has a garden hose male to a small ~1/2″ male end. Seals into the garden hose female. Just pour in until oil starts dripping into catch pan below Jeep, re-install plug. Careful not to over tighten plug, just needs to be snug, the plug doesn’t fasten anything..
By from -
By from -
