Reliable Supplier PTFE Graphite Packing with Aramid Corner to Qatar Importers
Reliable Supplier PTFE Graphite Packing with Aramid Corner to Qatar Importers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
20m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:

Related Product Guide:
A Look at the Molded Gasket
Useful Tips For Installing The Teflon Envelope Gasket
Reliable Supplier PTFE Graphite Packing with Aramid Corner to Qatar Importers, The product will supply to all over the world, such as: , , ,
CM, CME (MG, MGE 71, 80, 90, 100 and 132)
Table of contents:
Dismantling:
00:00 Removing the motor flange
01:11 Removing the diverting disc, o-ring and bearing cover plate
01:33 Removing fan cover, fan and the seal ring
02:24 Removing the rotor
Assembly:
02:55 Fitting the rotor
03:09 Fitting fan cover, fan and the seal ring
04:38 Fitting the diverting disc, o-ring and bearing cover plate
04:58 Fitting the motor flange
Recorded: July 2009
For more information please visit:
https://www.grundfos.com/service-support.html

