Wholesale 100% Original PTFE Graphite Packing with Aramid Corner for UK Importers
Wholesale 100% Original PTFE Graphite Packing with Aramid Corner for UK Importers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Wholesale 100% Original PTFE Graphite Packing with Aramid Corner for UK Importers, The product will supply to all over the world, such as: , , ,
semi-automatic tube filling and sealing machine,filler and sealer for tubes,أنبوب ملء وختم الآلة
Any questions,feel free to contact me.
Email:htpmachinery@gmail.com
Skype:zhang.tracy6
More information:https://twitter.com/htpmachinery
Chick here to subscribe us
https://www.youtube.com/channel/UCo4XjYB_mRONyQKah8jbjVw
Specifications
Semi-auto tube filling sealing machine 1.Used for tube package 2.Especially for toothpaste pruducts 3.For tube fill seal
Specification
1.Main machine frame with stainless steel covers
2.AC inverter for main drive for step-less speed variation-
3.Automatic tube hopper with pneumatic system of tube insertion into rotary index table
4.Rotary index table for transferring tubes to filling, closing stations and other sections
5.Tube orientation controlled by photocell for accurate positioning of tubes
6.50 litres capacity stainless steel hopper
7.Stainless steel volumetric dozing syringe and Teflon piston seals for accurate dosage with step-less adjustment of volume
8.Tube lifting at filling station — so that filling nozzle gets inserted inside tube during filling
9.Tail cutting by ‘suck back’ method to prevent dripping of product after filling
10. Hot air tool for plastic / laminated tubes (Leister make heater)
11.PID temperature controller for accurate control of hot air temperature
12.Air supply to air heater through independent blower
13.Batch code embossing facility within sealing jaws (by using negatively etched character type fount)
14. Trimming of plastic / lami tubes at the top end
Automatic tube ejection
Preset counter
No−Tube−No−Fill system
Control sensor for non ejected tubes
Low air pressure switch
Emergency stop
Fixed position machine stop
By from -
By from -
