100% Original Factory Aramid Fiber Braided Packing with PTFE Impregnated to Pakistan Importers
100% Original Factory Aramid Fiber Braided Packing with PTFE Impregnated to Pakistan Importers Detail:
Aramid fiber PTFE packing is braided from high quality Dupont aramid fiber with PTFE impregnated and lubricant additive. This packing can bear higher pressure applications than other types of braided packing. Due to its steel like strength, this yearn can used separately or as back up rings with other types of packing. This packing has been developed to replace asbestos packing for pump systems. It covers all the service ranges which asbestos packing provides and even much better.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
8Mpa |
20Mpa |
30Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
O-Ring Sizes for Industrial Applications
100% Original Factory Aramid Fiber Braided Packing with PTFE Impregnated to Pakistan Importers, The product will supply to all over the world, such as: , , ,
NKG, back to back (shaft seal, MG12-MG1)
Table of contents:
Dismantling:
00:00 Removing the pump housing
02:41 Removing the impeller
04:03 Removing the primary shaft seal
05:15 Removing the secondary shaft seal
Assembly:
06:06 Fitting the secondary shaft seal
08:36 Fitting the primary shaft seal
10:31 Fitting the impeller
11:41 Fitting pump housing
15:04 Wear ring replacement
Recorded: January 2010
For more information please visit:
https://www.grundfos.com/service-support.html
By from -
By from -
