15 Years Factory wholesale Spiral Wound Gasket-RIR for Macedonia Manufacturer
15 Years Factory wholesale Spiral Wound Gasket-RIR for Macedonia Manufacturer Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
15 Years Factory wholesale Spiral Wound Gasket-RIR for Macedonia Manufacturer, The product will supply to all over the world, such as: , , ,
PVC PIPES EXTRUSION LINE
www.amut.it
FEATURES:
BA125/28D — Twin screw extruder 110kw motor
Dosing unit and loading unit for vergin material
Dosing unit and loading unit for regrind
Temperature control cabinet with Industrial PC Siemens S7
2-stages calibration trough, 630mm max diameter, 10mt long
Cooling trough, 6mt long
Pipe marking unit
4 caterpillar haul-off unit
Planetary cutting unit, equipped with universal clamps
In-line belling unit, for solvent-cement socket and with O-Ring
Extrusion head for pipes up to 500mm diameter
Dies, sizers and belling tools for the below mentioned dimensions:
160mm Ø pipe: PN16
200mm Ø pipe: PN10-16
250mm Ø pipe: PN16
315mm Ø pipe: PN10
355mm Ø pipe: PN16
400mm Ø pipe: PN10-16
500mm Ø pipe: PN10-16
Mailto: info@amut.it
By from -
By from -
