2017 Latest Design PTFE Packing with Aramid Corner to Switzerland Factory
2017 Latest Design PTFE Packing with Aramid Corner to Switzerland Factory Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
2017 Latest Design PTFE Packing with Aramid Corner to Switzerland Factory, The product will supply to all over the world, such as: , , ,
GASKET JOINT KIT includes
2 Lower Plinum Manifold Paper Gasket
1 upper Plenum Manifold Paper Gasket
1 Oil Pump to Block Paper Gasket
1 IACV or Idle Control Valve Paper Gasket
1 EGR Actuator Valve Paper Gasket
1 Throttle Body Paper Gasket
2 Metal O-ring Composit Head Gasket
2 Aluminize Exhaust Manifold Gasket
2 Synthetic Rubber Valve Rocker Cover Joint Seal
2 Synthetic Rubber Camshaft Lip-Seal
1 Crankshaft Front Main Lip-Seal
1 Crankshaft Rear Main Lip-Seal
12 Engine polyarcrylate Valve Seal Stem Seal
2 Front Oil Pan Seal
6 Complete set of Fuel Injector O-Ring Seal and Joints
By from -
By from -
