Hot Sale for PTFE Packing with Aramid Corner Supply to Berlin
Hot Sale for PTFE Packing with Aramid Corner Supply to Berlin Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Useful Tips For Installing The Teflon Envelope Gasket
Hot Sale for PTFE Packing with Aramid Corner Supply to Berlin, The product will supply to all over the world, such as: , , ,
CM, CME (MG, MGE 71, 80, 90, 100 and 132)
Table of contents:
Dismantling:
00:00 Removing the motor flange
01:11 Removing the diverting disc, o-ring and bearing cover plate
01:33 Removing fan cover, fan and the seal ring
02:24 Removing the rotor
Assembly:
02:55 Fitting the rotor
03:09 Fitting fan cover, fan and the seal ring
04:38 Fitting the diverting disc, o-ring and bearing cover plate
04:58 Fitting the motor flange
Recorded: July 2009
For more information please visit:
https://www.grundfos.com/service-support.html
By from -
By from -
