OEM Supplier for PTFE Braided Gland Packing to Miami Importers

Braided with 100% expanded PTFE, soft character, super fiber strength, ideal abrasion resistant material.

Special porous structure of the fiber can better absorb and reserve lubrication and heat conductive agent useful for the sealing of packing to assure of consistency of lubrication and heat conductive agent, great reduction of possibility of efficacy loss. Much better meets demands of rigid using conditions.

With the exception of very few chemicals, resists almost medium.

Technical Data Sheet

 Application Area

Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.

It is particularly recommended for sugar and chocolate processing, and fine paper production.

=Features of Proportional Diaphragm Valve=
• Has a very high chemical resistance due to all PTFE wetted parts.
• Flow controllable by changing the input voltage.
• Has a comparatively large orifice diameter of 4 mm, which can cover a wide range of flows.

The Takasago’s Proportional Diaphragm Valve can be seen at the following link.

https://www.takasago-fluidics.com/products_valve/diaphragm/NPV/.

#Subscribe to my channels and get more product information#

https://www.youtube.com/channel/UCYYBVDTT2ewI7wIhjzrpwhw

================================
Takasago Fluidic Sytems
E-mail: info@takasago-elec.co.jp
Web: https://www.takasago-fluidics.com/

After i got done siliconing and painting my box, I figured I’ll make a ‘How to’ video on sealing the gap between the subwoofer and the box. My total cost out of pocket to just seal the gap was less $15 after tax. But prices may vary depending on the hardware store that’s nearest to you.

There was a couple of things I forgot to mention in the video. When you you apply the weather stripping, make sure the surface area is clean and free of any dust. Second, and most important, once you have the mounting hole of the sub lined up with mounting holes, DON’T put a lot of presseure when tightening the screws. Put to much pressure and you’ll push the t-nut out of it’s place. Happened to me twice, hahaha!

So, yeah, just put enough pressure to let the screw tighten. Then once it’s tight, you can torque down the screw tight enough so it won’t come loose.

Thanks for watching my vid, and please rate.

mastagoof