OEM Manufacturer Reinforced Flexible Graphite Gasket for Bolivia Factory
OEM Manufacturer Reinforced Flexible Graphite Gasket for Bolivia Factory Detail:
The reinforced flexible graphite composite gasket is composed of pressed metal sheet and flexible graphite grain after pressing and cutting.
1.Characteristic
Reinforced graphite gasket has perfect corrosion resistance, high &low temperature resistance, excellent elastic resilience, good strength. It can be cut into complex shape. Reinforced graphite gasket with inner &outer coating keeps all the excellent characteristics of itself, besides, it could be easily installed, disassembled, undamaged, meanwhile can prevent from medium corrosion, improve the pressure resistance.
2.Technical Data Sheet
|
Reinforced Material |
Pressure Resistance |
Temperature |
Elongation（%） |
Recovery（%） |
|
|
Oxidizing Environment |
Non-Oxidizing |
||||
|
CS Reinforce Sheet |
≥48 |
-10-450 |
-10-550 |
30-35 |
15-20 |
|
SS304,SS316 Reinforced Sheet |
≥48 |
-240-450 |
-200-600 |
30-35 |
15-30 |
|
SS304,SS316 Sheet |
≥48 |
-240-450 |
-200-600 |
30-40 |
10-15 |
|
Ss304, Mesh Sheet |
≥48 |
-240-450 |
-200-600 |
40-50 |
15-20 |
|
Reinforced Material |
Breathable (cm3/min) |
Leakage |
Seal Constant |
||
|
N2 m1/hr |
Bumming oil A |
“M” |
“Y” |
||
|
CS Reinforce Sheet |
<=0.8 |
30 |
<0.5 |
3.0 |
9000 |
|
SS304,SS316 Reinforced Sheet |
<=0.8 |
60 |
<0.5 |
2.5 |
4000 |
|
SS304,SS316 Sheet |
<=0.4 |
35 |
<0.5 |
2.0 |
900 |
|
SS304, Mesh Sheet |
≥1.0 |
70 |
<0.5 |
3.0 |
5000 |
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
O-Ring Sizes for Industrial Applications
OEM Manufacturer Reinforced Flexible Graphite Gasket for Bolivia Factory, The product will supply to all over the world, such as: , , ,
Can’t find a replacement for that torn ribbon cable; don’t want to pay for a new one – solder splice the two bits – did you save them ?
PLEASE NOTE: In the making of this video my efforts were necessarily clumsy because I could not take advantage of any magnification directly, especially using the microscope; I had to concentrate on aligning the cam to get a picture, so I was constrained to watching the screen of the VCR, it being too low resolution for productive effort. I would like to have used an eyepiece adaptor that fits both the camcorder and the ‘scope; then I should have been able to peer through the other eyepiece. So be assured it is a great deal easier than I make it look here. I have to admit that relatively few people have access to a stereo microscope; I paid around £180 ( ebay ) for this Russian made Lomo MBC-10, so at least it has been useful apart from being a toy.
I use a Yihua [ goes under several trade names ] workstation that has a heater blower – like a hair drier but hotter and more concentrated flow of air – and a soldering iron that has, as an accessory, a very fine, needle point bit, allowing you to make a good job of such tiny amounts of solder, almost too small to see with the naked eye.
The VX1000 mic/remote/cp flexiboard cable is about 1cm wide; with only a “normal” fine point soldering bit 40 joints were made in the space of approx 0.9 sq cm. The much finer bit was/is available as an optional accessory.
See this video for demonstration of USB microscope: “ToddFun.com: USB Microscope Review”.
Mario Parodi [ Guitar ] plays:-
Albeniz: Rumores de la Caleta; SE-Op 165 – Malaguena
Brahms: Cradle Song Op 49 no 4
Debussy: Arabesca No 1; SB – Clair de lune
By from -
By from -
