Factory source manufacturing PTFE Graphite Packing with Aramid Corner to Moscow Manufacturers
Factory source manufacturing PTFE Graphite Packing with Aramid Corner to Moscow Manufacturers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
Factory source manufacturing PTFE Graphite Packing with Aramid Corner to Moscow Manufacturers, The product will supply to all over the world, such as: , , ,
I am just finishing installing the water pump in my friends 2010 Yamaha R1. It was leaking water out of the weap hole they built in them that leaks from the middle of the oil pan if you can believe that. Its just a two piece oil seal in the water pump that goes bad just behind the impeller. Ill add the Yamaha Part numbers later when I have more time as well as add the rest of the videos of the removal and earlier install
By from -
By from -
