Super Purchasing for PTFE Gasket to Romania Factory
Super Purchasing for PTFE Gasket to Romania Factory Detail:
PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.
Technical Data Sheet
| Property | Unit | Result |
| Density | g/cm3 | 2.18 |
| Elongation at Break | % | 200~450 |
| Tensile Strength | Mpa | 14~18 |
| Bending Strength | Mpa | No Break |
| Pressure Resistance | Mpa | 24 |
| Tensile Modulus | Mpa | 393 |
| Bending Modulus | Mpa | 490~586 |
| Working Temperature
(20000 hr, highest) |
℃ |
260 |
Application Area
As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
O-Ring Sizes for Industrial Applications
Super Purchasing for PTFE Gasket to Romania Factory, The product will supply to all over the world, such as: , , ,
This video shows you how to adjust a HuMa R-10 regulator and how to service it.
Please ensure the regulator has been removed from the rifle before stripping it!
The O rings are:
Small piston O ring – 1.5mm cross section x 5.5mm internal diameter nitrile 70 shore (N70),
Large piston O ring – 1.5mm cross section x 12.5mm internal diameter nitrile 70 shore (N70)
Main body O ring – 2mm cross section x 12mm internal diameter nitrile 70 shore (N70),
Small body O ring – 1.5mm cross section x 9mm internal diameter nitrile 70 shore (N70)
Cap O ring – 1.5mm cross section x 17mm internal diameter nitrile 70 shore (N70),
To purchase a HuMa regulator please visit the eShop on www.xtxair.com
By from -
By from -
