Good Quality for PTFE Graphite Packing with Aramid Corner for Pretoria Importers
Good Quality for PTFE Graphite Packing with Aramid Corner for Pretoria Importers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
Good Quality for PTFE Graphite Packing with Aramid Corner for Pretoria Importers, The product will supply to all over the world, such as: , , ,
Product Description:
HART Lug Nut Hammer Unions are modified with Stub-Acme threads ideal for applications requiring rapid assembly and/or breakdown.
Available for Series 3131 (screwed) and 3333 (socketweld) and 3535 (buttweld)
Lugs welded-on for superior strength when compared to forged lugs
Quick spin-off modified acme threads on sizes 1″ to 3″. On 1/8″ to 3/4″ 12 pitch 60º V threads are used
All HART Industrial Unions are precision machined
Specify prefix “H”
Viton O-Ring standard, Buna N, Teflon, EPDM, Neoprene also available
MADE IN USA!
I’ve found a better way to shorten and seal the oil spout under the cylinder for installing a torque converter rated up to 8 hp on a larger small engine. You’ll need a Metric M20 bolt and some teflon tape.
By from -
By from -
