factory wholesale good quality PTFE Gasket to azerbaijan Manufacturers
factory wholesale good quality PTFE Gasket to azerbaijan Manufacturers Detail:
PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.
Technical Data Sheet
| Property | Unit | Result |
| Density | g/cm3 | 2.18 |
| Elongation at Break | % | 200~450 |
| Tensile Strength | Mpa | 14~18 |
| Bending Strength | Mpa | No Break |
| Pressure Resistance | Mpa | 24 |
| Tensile Modulus | Mpa | 393 |
| Bending Modulus | Mpa | 490~586 |
| Working Temperature
(20000 hr, highest) |
℃ |
260 |
Application Area
As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Useful Tips For Installing The Teflon Envelope Gasket
factory wholesale good quality PTFE Gasket to azerbaijan Manufacturers, The product will supply to all over the world, such as: , , ,
Shifts much better with 10W30 installed.
As usual it’s difficult to get oil back into the manual transmission without a proper pump. Jeep design makes it handy to just pour oil in with a longer hose while standing beside front fender.
Used a 90 degree fitting from Lowes that has a garden hose male to a small ~1/2″ male end. Seals into the garden hose female. Just pour in until oil starts dripping into catch pan below Jeep, re-install plug. Careful not to over tighten plug, just needs to be snug, the plug doesn’t fasten anything..
By from -
By from -
