Rapid Delivery for Spiral Wound Gasket-CG to Sierra Leone Manufacturers

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

Technical Data Sheet

Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.

How to re-caulk a inground pool deck. Removing the old caulk, I used a 5-1 painters knife. The backer rod/ caulk saver foam was from Lowes (in the weather strip area) and the size I used was 5/8″ (will vary based on crack size) . The caulk also came from Lowes in the concrete section. Some small areas did leak through causing a hole or gap. the next day I skimmed a little latex caulk over the hole then after it dried added another coat of the self leveling caulk to cover the latex caulk.