Free sample for PTFE Graphite Packing with Aramid Corner to Swiss Manufacturers

Short Description:

PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency. Technical Data Sheet   Rotating Reciprocating Valves Pressure 4Mpa 15Mpa 25Mpa Shaft Speed 20m/s rotary Temperature -200℃~+280℃ PH Range 2~12  Application Area It affords longer service life under severe conditions which conventional...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Free sample for PTFE Graphite Packing with Aramid Corner to Swiss Manufacturers Detail:

PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.

Technical Data Sheet

 

Rotating

Reciprocating

Valves

Pressure

4Mpa

15Mpa

25Mpa

Shaft Speed

20m/s rotary

Temperature

-200℃~+280℃

PH Range

2~12

 Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.


Product detail pictures:

Free sample for
 PTFE Graphite Packing with Aramid Corner to Swiss Manufacturers detail pictures


Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials

Free sample for PTFE Graphite Packing with Aramid Corner to Swiss Manufacturers, The product will supply to all over the world, such as: , , ,


  • Available to buy at: https://www.tradecounterdirect.com/sea…

    Henkel Loctite 55 Pipe Sealing Cord is a new, faster, more versatile pipe sealant which out-dates traditional tapes and hemp/pastes combinations.

    Impregnated with paste to give a high pressure seal to your joints. Loctite 55 should be wound a few times around the thread and once the joint has been closed tightly, will withstand pressures in the region of 40 bar.

    Use for cold and hot water applications, as well as potable water or gas. Use on copper, steal or plastic pipe systems.

    Loctite 55 is resistant to:
    Hot and cold drinking water
    Hot water
    Domestic gas
    Natural Gas
    Liquefied gas in gaseous state
    Gas condensates
    Compressed air
    Industrial oils (contains silicone oil.)

    Not suitable for heating oil or fuels – Use instead Loctite 577.

    Complies with EN 751-2 and has DVGW approval. Certifies to ANSI/ NSF Standard 61


    5 Stars By from -

    5 Stars By from -

    Related Products