Quality Inspection for Spiral Wound Gasket-CG for Latvia Manufacturers
Quality Inspection for Spiral Wound Gasket-CG for Latvia Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
Quality Inspection for Spiral Wound Gasket-CG for Latvia Manufacturers, The product will supply to all over the world, such as: , , ,
To purchase https://www.codythecarguy.com/store/product/ford-7-3-nozzles/
I broke down a injector so you can see the working parts and how the new nozzle goes on it. Also o-rings replacement and how the solenoid goes on it. These injectors have a mini p&b in them also known as the plunger that moves the fuel through the metering valve
https://www.codythecarguy.com/store/product/7-3-injector/
https://www.codythecarguy.com/store/product/ford-7-3-nozzles/
In this video I demonstrate how to fix the whining power steering noise on a 7th generation Honda Accord V6 coupe. The problem stems from cold air entering …
By from -
By from -
