Good Quality for PTFE Graphite Packing with Aramid Corner for Pretoria Importers

Short Description:

PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency. Technical Data Sheet   Rotating Reciprocating Valves Pressure 4Mpa 15Mpa 25Mpa Shaft Speed 20m/s rotary Temperature -200℃~+280℃ PH Range 2~12  Application Area It affords longer service life under severe conditions which conventional...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Good Quality for PTFE Graphite Packing with Aramid Corner for Pretoria Importers Detail:

PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.

Technical Data Sheet

 

Rotating

Reciprocating

Valves

Pressure

4Mpa

15Mpa

25Mpa

Shaft Speed

20m/s rotary

Temperature

-200℃~+280℃

PH Range

2~12

 Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.


Product detail pictures:

Good Quality for
 PTFE Graphite Packing with Aramid Corner for Pretoria Importers detail pictures


Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
Comparison of O-Ring Materials

Good Quality for PTFE Graphite Packing with Aramid Corner for Pretoria Importers, The product will supply to all over the world, such as: , , ,


  • Visit https://parts.rheem.com to buy manufacturer authorized parts for Rheem, Ruud, Richmond, Marathon, Eclipse, Vanguard, Hotpoint and General Electric (GE) water heaters. We also offer many universal parts designed to fit most other brands of water heaters.

    If your water heater’s drain valve is leaking, or doesn’t allow a good water flow while flushing the tank, it’s time to replace the valve. This is a relatively easy job you can do yourself in about 30 minutes.

    This video shows detailed step-by-step procedure for how to replace a drain valve on a gas or electric hot water heater.

    Tools you’ll need
    Replacement drain valve
    Adjustable wrench
    Pipe sealer or Teflon tape
    Rags or towels

    WARNING: For your safety, be sure to carefully read and understand the manufacturer’s Use and Care Manual, in its entirety, prior to operating, repairing or adjusting the water heater. Failure to do so may result in fire or explosion, electric shock, property damage, personal injury, or loss of life. If you do not understand these instruction or any terms within them, please contact a qualified service professional. Prior to starting any repairs or service on your water heater, please thoroughly read the Use and Care Manual provided with your water heater. If at any time you are unsure or uncomfortable about the suggested repair or service discussed herein, stop any activity and immediately contact a licensed plumber.



    If the sliding door on your van is hard to open and close, or if it feels like the door of your van is stuck when you open and close it, you can fix the stuck door by oiling the rollers. The van in the video is a GMC Safari, which is the same as the Chevrolet Astro Van. Most minivans use a similar system.
    To fix your van door and make it open smoothly, get some spray oil, like Tri-Flow and spray oil on all the rollers, top, middle, and bottom. Once the rollers on the stuck van door are oiled, the door will open smoothly.


    5 Stars By from -

    5 Stars By from -

    Related Products