Good Wholesale Vendors Spiral Wound Gasket-CGI to Comoros Manufacturer
Good Wholesale Vendors Spiral Wound Gasket-CGI to Comoros Manufacturer Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
Good Wholesale Vendors Spiral Wound Gasket-CGI to Comoros Manufacturer, The product will supply to all over the world, such as: , , ,
Circular knife cutting machine for cutting hoses into gaskets and o-rings. For hoses tubes with suitable material properties, the »CCM 4 Gasket« offers an excellent possibility to produce gaskets with a circular knife. Depending on requirements, with each cut a plurality of seals can be cut, so that the production is increased significantly.
Kreisschneidemaschine zum Schneiden von Flachdichtungen und O-Ringen. Für Schläuche mit geeigneten Materialeigenschaften bietet die »CCM 4 Gasket« eine exzellente Möglichkeit, Flachdichtungen mit dem Kreismesser zu schneiden. Je nach Anforderung werden bei jedem Schnitt gleich mehrere Dichtungen geschnitten, so dass die Produktion deutlich gesteigert wird.
By from -
By from -
