OEM Manufacturer PTFE O RING to Honduras Manufacturer
OEM Manufacturer PTFE O RING to Honduras Manufacturer Detail:
PTFE o-rings are produced with 100% Virgin PTFE or filled PTFE,and fabricated to extremely close tolerances and to the highest industry and military specifications. It is resistant to most chemicals including acids, bases, oils, steam and other chemicals. It is also very tough and abrasive resistant.
Technical Data Sheet
| Property | Unit | Result |
| Density | g/cm3 | 2.1~2.3 |
| Tensile Strength | Mpa | 15.0 |
| Elongation at Break | % | 150 |
Application Area
- Agricultural, pumps, mining
- Rail and transport use, Wheels
- General engineering applications
- Marine, Shipping, Automotive
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
OEM Manufacturer PTFE O RING to Honduras Manufacturer, The product will supply to all over the world, such as: , , ,
Leaking pipes due to galvanic corrosion is a very common phenomenon on almost every vessel.
Repairs with Wencon Pipe Tape require no tools. Besides the pipe bandage the package also contains protective gloves and plastic bags for water. If the pipe can not be emptied or when high pressure repairs are required, Wencon Putty can be used to stop the leakage and reinforce the repair.
Facts about Wencon Pipe Tape:
Wencon Pipe Tape is a fast curing pipe repair bandage especially formulated to make quick and effective repairs of cracks, leaks, fractures, and corrosion porosity in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance.
Wencon Pipe Tape is a pre impregnated fibreglass bandage ready for use after soaking in water for 10 seconds. After 10 minutes cure the bandage hardens and the pipe can usually be reactivated. The bandage is fully cured within 1 hour.
Facts:
- The instant repair bandage for leaking pipes
- Quick and effective to use
- No mixing No tools
- Water activated
- Ready for use in 10 seconds Cures in 10 minutes
- Suitable for all pipes and surfaces
For more information – visit www.wencon.com.
Thanks to www.danosongs.com for the backgorund music!
If you have ever tried to apply teflon tape to a fitting with NPT threads, you WILL relate to this video. Kent will show you some of the frustration he has experienced doing this and then show you a clever solution thought up by his mechanic. No cost involved!
By from -
By from -
