Big Discount Aflas O-Ring to Zimbabwe Manufacturer
Big Discount Aflas O-Ring to Zimbabwe Manufacturer Detail:
Aflas based synthetic rubber, reinforced with carbon black and peroxide cured. Has good rapid gas decompression(FGD) resistant properties, which making it suitable for many high pressure gas applications. Temperature capability for this type compound is +5~+200℃.
Technical Data Sheet
Properties | Units | Typical value |
Hardness | IRHD | 84 |
Tensile strength | MPa | 22 |
Elongation at break | % | 189 |
Modulus at50% elongation | MPa | 4 |
Modulus at100% elongation | MPa | 12 |
Product detail pictures:

Related Product Guide:
What Is A PTFE Ring Gasket?
O-Ring Sizes for Industrial Applications
Big Discount Aflas O-Ring to Zimbabwe Manufacturer, The product will supply to all over the world, such as: , , ,
The aim of tightening a compression joint is to create a gas tight joint without compressing the olive too tight on the pipe by over tightening the nut as this will restrict flow through the pipe as the pipe will have been made internally smaller.
GAS IT and FES Autogas Ltd do not accept any liability from users following this video or information we provide.
We highly recommend getting a GAS IT Trained Dealer or Qualified Gas engineer to check your installation and fitment of GAS IT parts prior to filling and using it with LPG/ Autogas.
semi-automatic tube filling and sealing machine,filler and sealer for tubes,أنبوب ملء وختم الآلة
Any questions,feel free to contact me.
Email:htpmachinery@gmail.com
Skype:zhang.tracy6
More information:https://twitter.com/htpmachinery
Chick here to subscribe us
https://www.youtube.com/channel/UCo4XjYB_mRONyQKah8jbjVw
Specifications
Semi-auto tube filling sealing machine 1.Used for tube package 2.Especially for toothpaste pruducts 3.For tube fill seal
Specification
1.Main machine frame with stainless steel covers
2.AC inverter for main drive for step-less speed variation-
3.Automatic tube hopper with pneumatic system of tube insertion into rotary index table
4.Rotary index table for transferring tubes to filling, closing stations and other sections
5.Tube orientation controlled by photocell for accurate positioning of tubes
6.50 litres capacity stainless steel hopper
7.Stainless steel volumetric dozing syringe and Teflon piston seals for accurate dosage with step-less adjustment of volume
8.Tube lifting at filling station — so that filling nozzle gets inserted inside tube during filling
9.Tail cutting by ‘suck back’ method to prevent dripping of product after filling
10. Hot air tool for plastic / laminated tubes (Leister make heater)
11.PID temperature controller for accurate control of hot air temperature
12.Air supply to air heater through independent blower
13.Batch code embossing facility within sealing jaws (by using negatively etched character type fount)
14. Trimming of plastic / lami tubes at the top end
Automatic tube ejection
Preset counter
No−Tube−No−Fill system
Control sensor for non ejected tubes
Low air pressure switch
Emergency stop
Fixed position machine stop

