factory customized PTFE Packing with Aramid Corner to Finland Factory
factory customized PTFE Packing with Aramid Corner to Finland Factory Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
factory customized PTFE Packing with Aramid Corner to Finland Factory, The product will supply to all over the world, such as: , , ,
First, I sanded the cracked area so the epoxy would adhere to the tank better. After applying the epoxy, I let it cure overnight for 12 hours. However, I noticed a spot that I had missed so I applied more quick steel the following morning.
This is the first time I’ve done this so I’m crossing my fingers hoping it works. I’ve seen other videos where people use soldering irons before applying the epoxy however, I did not take that approach because my tank was full of fuel. I did want to risk catching something on fire.
By from -
By from -
