Best quality and factory Tellerette Packing Ring for Costa rica Manufacturers

Short Description:

Material: PE, PP, RPP, PVC, CPVC and PVDF. Tellerette Packing Rings have features such as high void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific weight, high mass transfer efficiency, etc., and the application temperature in media ranges from 60℃ to 150 ℃.For these reasons, them are widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Best quality and factory Tellerette Packing Ring for Costa rica Manufacturers Detail:

Material: PE, PP, RPP, PVC, CPVC and PVDF. Tellerette Packing Rings have features such as high void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific weight, high mass transfer efficiency, etc., and the application temperature in media ranges from 60℃ to 150 ℃.For these reasons, them are widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.

Technical Data Sheet

20170531164436


Product detail pictures:

Best quality and factory
 Tellerette Packing Ring for Costa rica Manufacturers detail pictures


Related Product Guide:
O-Ring Sizes for Industrial Applications
Useful Tips For Installing The Teflon Envelope Gasket

Best quality and factory Tellerette Packing Ring for Costa rica Manufacturers, The product will supply to all over the world, such as: , , ,


  • **How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s More of my How to on SeaDoo below:
    Ok! Seadoo GTX Carbon Ring Floating Ring Bellows Drive shaft replace fix leak carbone. OK! Same instructions for all 1997 97 Seadoo (Except XP and HX ) SP SPX GS GSI GSX GTS GTI. Steps: 1. Remove the O-Ring or Half Metal Ring on the Floating Ring. 2. Loosen up the clamps holding bellows and carbon ring. 3. Remove the nuts and bolts for steering and reverse. 4. Remove the 4 nuts or screw for the impeller housing. 5. You can now pull the Imp housing and drive shaft and all… 6. Use the video as a guide.
    Check your internal fuel too! See 2 more Seadoo video links below:
    1. How to repair Seadoo Beepers: https://youtu.be/pY-G6IX08pU 2. How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s
    3. Clogged internal carb fuel filters. It was caused by the gray Tempo Fuel Lines. https://www.youtube.com/watch?v=0WdK7lTj


    5 Stars By from -

    5 Stars By from -

    Related Products