Cheapest Factory PTFE Packing with Aramid Corner Supply to Ghana
Cheapest Factory PTFE Packing with Aramid Corner Supply to Ghana Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
Cheapest Factory PTFE Packing with Aramid Corner Supply to Ghana, The product will supply to all over the world, such as: , , ,
2002-2006 MINI Cooper S won’t go in 1st gear? See how to replace & bleed the clutch slave cylinder. Similar procedure for non-S.
Get a clutch slave cylinder here:
https://amzn.to/1H5tH5V
Get brake fluid here:
I like ATE 200 for street use:
https://amzn.to/ZzM0AN
If you’ll be putting the car on the race track, Motul 600 is a better choice:
https://amzn.to/1eDp4s0
Get the power bleeder here:
Get this one that includes European/US adapters & clamp on adapter
https://amzn.to/1ClGSmE
If you just want the European adapter, buy the standalone bleeder:
https://amzn.to/1J1wZYb
and the European adapter:
https://amzn.to/1HJePhg
(If you are VERY careful, you can also use this adapter standalone with your air compressor with the regulator adjusted to deliver less than 15psi)
By from -
By from -
