New Fashion Design for Spiral Wound Gasket-R to Czech Republic Manufacturer
New Fashion Design for Spiral Wound Gasket-R to Czech Republic Manufacturer Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
New Fashion Design for Spiral Wound Gasket-R to Czech Republic Manufacturer, The product will supply to all over the world, such as: , , ,
Leaking pipes due to galvanic corrosion is a very common phenomenon on almost every vessel.
Repairs with Wencon Pipe Tape require no tools. Besides the pipe bandage the package also contains protective gloves and plastic bags for water. If the pipe can not be emptied or when high pressure repairs are required, Wencon Putty can be used to stop the leakage and reinforce the repair.
Facts about Wencon Pipe Tape:
Wencon Pipe Tape is a fast curing pipe repair bandage especially formulated to make quick and effective repairs of cracks, leaks, fractures, and corrosion porosity in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance.
Wencon Pipe Tape is a pre impregnated fibreglass bandage ready for use after soaking in water for 10 seconds. After 10 minutes cure the bandage hardens and the pipe can usually be reactivated. The bandage is fully cured within 1 hour.
Facts:
- The instant repair bandage for leaking pipes
- Quick and effective to use
- No mixing No tools
- Water activated
- Ready for use in 10 seconds Cures in 10 minutes
- Suitable for all pipes and surfaces
For more information – visit www.wencon.com.
Thanks to www.danosongs.com for the backgorund music!
By from -
By from -
