Reasonable price for Spiral Wound Gasket-CGI Wholesale to Nicaragua
Reasonable price for Spiral Wound Gasket-CGI Wholesale to Nicaragua Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Useful Tips For Installing The Teflon Envelope Gasket
Reasonable price for Spiral Wound Gasket-CGI Wholesale to Nicaragua, The product will supply to all over the world, such as: , , ,
CM, CME (MG, MGE 71, 80, 90, 100 and 132)
Table of contents:
Dismantling:
00:00 Removing the motor flange
01:11 Removing the diverting disc, o-ring and bearing cover plate
01:33 Removing fan cover, fan and the seal ring
02:24 Removing the rotor
Assembly:
02:55 Fitting the rotor
03:09 Fitting fan cover, fan and the seal ring
04:38 Fitting the diverting disc, o-ring and bearing cover plate
04:58 Fitting the motor flange
Recorded: July 2009
For more information please visit:
https://www.grundfos.com/service-support.html
By from -
By from -
