Factory Cheap price Serrated Gasket to Netherlands Importers

1.Structure

Serrated Gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.

The Serrated Gasket with inner and outer rings or composite gasket attached with flexible graphite or Teflon sheet are available depending on the working location and requirement.

2.Characteristic

Serrated Gasket is an idea gasket used in low pre-tightening, the soft sealing surface avoid metal to metal touch, can be combined reliably and closely, protect flange not to be damaged. This kind of gasket is suitable to high pressure and high temperature location. Strong corrosion resistance, stable and reliable sealing function.

3.Gasket Typ

   Basic Type                                        With outer Ring

4. Working Environment

Working Temperature：~650℃

Working Pressure：6.4-16.0MP

Min. Pre-tightening：y=70MPa

Incepted in the year 1992, Neeta Enterprises is engaged in the production and supply of qualitative rubber products. Under the able guidance of our mentor Mr. Vijay Dhatrak we offer complete range of rubber products having wide industrial uses. Delivering world class products within the stipulated time frame we have become synonymous for premium quality and total reliability. Having sound infrastructure we make every effort to manufacture excellent engineered equipment. We endeavor to offer innovative range of rubber products.

Spark Gap RU-69 for aviation engine ignition systems sales@dmphotonics.com

Triggered Spark Gaps sales@dmphotonics.com

https://www.dmphotonics.com/Plasma/Triggered%20Spark%20Gap%20Switches.htm

The first blasting cap or detonator was demonstrated in 1745, when a Dr. Watson of the Royal Society showed that the electric spark of a Leyden jar could ignite black powder.
In 1750, Benjamin Franklin in Philadelphia made a commercial blasting cap consisting of a paper tube full of black powder, with wires leading in both sides and wadding sealing up the ends. The two wires came close but did not touch, so a large electric spark discharge between the two wires would fire the cap.
In 1822 the first hot wire detonator was produced by Dr Robert Hare. Using one strand separated out of a multistrand wire as the hot bridgewire, this blasting cap ignited a pyrotechnic mixture (believed to be potassium chlorate/arsenic/sulphur) and then a charge of tamped black powder.

In 1863 Alfred Nobel introduced the first pyrotechnic fuse blasting cap, using mercury fulminate to detonate nitroglycerin.

In 1868, H. Julius Smith introduced a cap that combined a spark gap ignitor and mercury fulminate, the first electric cap able to detonate dynamite.

A detonator is a device used to trigger an explosive device. Detonators can be chemically, mechanically, or electrically initiated, the latter two being the most common.

The commercial use of explosives uses electrical detonators or the capped fuse which is a length of safety fuse to which an ordinary detonator has been crimped. Many detonators’ primary explosive is a material called ASA compound. This compound is formed from lead azide, lead styphnate and aluminium and is pressed into place above the base charge, usually TNT or tetryl in military detonators and PETN in commercial detonators.

Other materials such as DDNP (diazo dinitro phenol) are also used as the primary charge to reduce the amount of lead emitted into the atmosphere by mining and quarrying operations. Old detonators used mercury fulminate as the primary, and it was often mixed with potassium chlorate to yield better performance.

Electrical detonators[edit source

There are three categories of electrical detonators: instantaneous electrical detonators (IED), short period delay detonators (SPD) and long period delay detonators (LPD). SPDs are measured in milliseconds and LPDs are measured in seconds.

In situations where nanosecond accuracy is required, specifically in the implosion charges in nuclear weapons, exploding-bridgewire detonators are employed. The initial shock wave is created by vaporizing a length of a thin wire by an electric discharge.

A new development is a slapper detonator, which uses thin plates accelerated by an electrically exploded wire or foil to deliver the initial shock. It is in use in some modern weapon systems. A variant of this concept is used in mining operations, when the foil is exploded by a laser pulse delivered to the foil by optical fiber.
Electric detonators
Magnetic couplings
Blasting cap
Dead man’s trigger
Detonation
Detonating cord
Detonator (railway)
Exploding-bridgewire detonator
Explosive booster
Explosive material
Firing pin
Fuse (explosives)
NASA standard detonator
Nuclear weapon design
Pencil detonator
Shock tube detonator
Slapper detonator
Triggering sequence
Urchin (detonator)
triggered spark gap ratings
electrostatic analysis of triggered spark gaps
perkin elmer spark gaps
arcing in air
spark gap tube
jacobs ladder high voltage
purpose of spark gap
spark gap voltage

BAE Systems
Battelle Memorial Institute
Czech Technical University
Eglin AFB
Florida A&M University
Johns Hopkins University, Applied Physics Laboratory
Lawrence Livermore National Laboratory
Los Alamos National Laboratory
Loughborough University
NASA Marshall Space Flight Center
Sandia National Laboratories
Science University of Tokyo
University of Bologna (Italy)
University of California
University of Ferrara (Italy)
Manchester University
University of Southern California
University of Western Australia
US Army Research Laboratory
US Naval Research Laboratory