Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar
Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar, The product will supply to all over the world, such as: , , ,
Impressive magnets equipment going through factory tests #F4E #ITER
Footage of the winding process of the PF coils conductors filmed at the SEA ALP workshop, Turin (Italy), before the equipment travels to ITER’s PF coils facility. It is the first time ever that the “two in hand” technique will be used for the winding and wrapping of such a large conductor. “Two in hand” means working with two conductors winding them together in a concentric spiral and eventually connecting them at the end to form a Double Pancake coil”.
By from -
By from -
