Wholesale Price China NBR O-Ring for Chile Factories
Wholesale Price China NBR O-Ring for Chile Factories Detail:
Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.
Technical Data Sheet
| Color | Black or Color |
| Material | Nitrile(NBR) |
| Hardness(Shore A) | 65~75 |
| Temperature(℃） | -30~+120 |
| Tensile Strength(Mpa) | 14 |
| Elongation at Break(%) | 384 |
| Density(g/cm3) | 1.2 |
Application Area
Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
Wholesale Price China NBR O-Ring for Chile Factories, The product will supply to all over the world, such as: , , ,
Vetaphone and Coating Plasma Industrie demonstrates the EASI-Plasma system for surface treatment of films and foils.
Vetaphone’s EASI-Plasma system works on the same principles as a Corona system, but by replacing the oxygen with gases or monomers, the EASI-Plasma can create new and innovative abilities on the film surface. The EASI-Plasma system does this with a significantly lower amount of consumables than any other solution on the market.
Benefits of EASI-Plasma
• Higher and longer lasting dyne values
• Replace your primer or coating unit with a cheaper solution
• Nano-coating thickness only 5-50 nm
• Anti-fog
• Hydrophilic or Hydrophobic surface
• A large variety of other abilities
EASI-Plasma provides a wide range of benefits for the coating and converting processes; such as nano-coating, anti-fog properties, low surface ageing and higher dyne levels.
EASI-Plasma reduces production costs by eliminating the need to use expensive primer, so the cost per m2 is reduced significantly. As the layer of primer is not needed, it is possible to produce much thinner film.
Similar advantages are present, when using the EASI-Plasma for nano-coating. By making the nano-coated layer only 5-50 nm thick, the EASI-Plasma brings down the cost per m2 and creates possibilities to produce new innovative thinner films.
All in all there is a great potential for saving resources and creating new surface abilities by employing EASI-Plasma.
By from -
By from -
