Big discounting PTFE Graphite Packing with Aramid Corner Supply to Uruguay
Big discounting PTFE Graphite Packing with Aramid Corner Supply to Uruguay Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
20m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
Big discounting PTFE Graphite Packing with Aramid Corner Supply to Uruguay, The product will supply to all over the world, such as: , , ,
When you spend your life in the water, I guess you tend to develop a good intuition for its subtleties. Dolphins have been observed to create bubble rings by exhaling air carefully in the middle of the vortices caused by the motion of their fins through the water, among other techniques.
Besides being nice to look at (and a neat demonstration of fluid mechanics), this phenomenon also might throw some light on dolphin cognition, since the skill to create the rings is a bit subtle and tends to be taught from one dolphin to the next via careful observation and practice. I’m also intrigued by the report that they seem to be using sonar to locate the vortex in the water, since that would be a fairly amazing bit of audio analysis.
This was filmed and edited by chiajungchi, who also has a YouTube site. Thanks for allowing me to post it as well, chiajungchi!
By from -
By from -