Factory source manufacturing PTFE Graphite Packing with Aramid Corner to Moscow Manufacturers
Factory source manufacturing PTFE Graphite Packing with Aramid Corner to Moscow Manufacturers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
Factory source manufacturing PTFE Graphite Packing with Aramid Corner to Moscow Manufacturers, The product will supply to all over the world, such as: , , ,
Monkey Wrench Gang, Threading over 120+ pipes with the $30 Harbor Freight #94101 Pipe Threader I had for years. I bought it to replace those cheap and dirty, ugly, bent, wooden dowel rods in my closets. You can do it Make nipples down to 7″, any smaller and you have to buy them. Actually the Rigid pipe threader I mentioned is now over $4000+ and takes up to much room for a home owner, like those ads on Craigslist. Sides you don’t need to drive to the gym to smell farts to get a work out. And its snowing out. I’m gonna get some cutting machine oil as soon as I get around to it.Some day, Soon:)8
By from -
By from -
