OEM Supplier for PTFE Filament Braided Packing to Chile Factories

PTFE filament packing is braided from pure PTFE filament yarn and impregnated with PTFE dispersion, it has the better internal structure, higher cross-sectional density and structural strength than traditional PTFE packing.

Technical Data Sheet

 Application Area

Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.  

A&M HW100 fill valve leak repair.

If you have a leaky cylinder you should contact A&M, who should repair it under warranty.

If you find your A&M cylinder is leaking from the fill port then you can either replace the O ring on the little plunger inside the valve or you can convert it to a simple M10* countersunk bolt with an O ring seal. The O rings and bolts can be bought on eBay or your local DIY store.

*It has come to my attention that A&M use a number of different sizes of bolts in their fill valves so you will need to measure yours to make sure you are buying the correct size bolt and O ring.
www.xtxair.com

If you have a leaky cylinder you should contact A&M, who should repair it under warranty.

Teflease MG 2 is a PTFE film coated with a silicone adhesive.

Teflease MG tapes will release from most resin systems. They are ideal for use on tooling blocks and all areas where high elongation and release is needed. Teflease MG tapes will form to critical contours and mold surfaces while offering multiple releases or may be used to cover multiple detail mold seams. They provide a semi-permanent release on cured Airpad tooling rubber and Aircast 3700 pressure intensifiers and mandrels.

Benefits:
• Teflease MG2 provides permanent release and superior surface finish, saving time and improving quality.
• Protect rubber tooling mandrels and intensifiers from resin attack, extending tool life and reducing cost.
• Good elongation makes application to complex shapes easier, reducing time and improving quality.

For more information, please visit: www.airtechonline.com