Factory supplied PTFE Graphite Braided Packing Supply to Norwegian
Factory supplied PTFE Graphite Braided Packing Supply to Norwegian Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
2Mpa |
15Mpa |
15Mpa |
Shaft Speed |
14m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
Factory supplied PTFE Graphite Braided Packing Supply to Norwegian, The product will supply to all over the world, such as: , , ,
Tutorial mostrando a troca do o-ring do segundo estágio da bomba Hatsan utilizada para recarga de armas de ar comprimido PCP.
Tutorial showing how to replace the o-ring of the second stage of the Hatsan pump used to recharge PCP air guns.
Tutorial que muestra cómo reemplazar la junta tórica de la fase segunda de la bomba Hatsan que se utiliza para recargar las armas de aire PCP.
What is shrink wrap? Shrink wrap is applied over or around the intended item, often by automated equipment. It is then heated by a heat gun or sent through a …
By from -
By from -