Hot Selling for Rubber Gasket/Washer Export to Poland
Hot Selling for Rubber Gasket/Washer Export to Poland Detail:
Rubber is the most cost-effective material to use where temperature and pressures are low and the chemical environment is mild. Different elastomers offer different mechanical and chemical properties. Cloth&metal inserted materials are better able to handle movement and high compression loads.
Technical Data Sheet
|
Material |
NR, NBR,SBR,BR,IR,CR,EPDM,VITON(FKM),SIR,SILICONE |
|
Hardness |
Silicone about 50~90 shore A, others about 60~90 shore A |
|
Temperature Resistance |
-40~+300℃ |
|
Technology |
Hot pressing or injection Molding |
|
Second Processing |
Vulcanizing/Deburring/silk-screen/Carving/Printing |
|
Quality Control |
Internal QC control |
|
Product Feature |
Oxidation, chemical, oil, acid, alkali, weather resistance |
|
Colorful, anti-aging, good flexibility,good elasticity |
Application Area
l Electron Components
l Medical Equipment
l Home Appliance
l Mechanical Equipment
l Office Facilities
l Aviation
l Construction
l Automobile
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
Hot Selling for Rubber Gasket/Washer Export to Poland, The product will supply to all over the world, such as: , , ,
Can’t find a replacement for that torn ribbon cable; don’t want to pay for a new one – solder splice the two bits – did you save them ?
PLEASE NOTE: In the making of this video my efforts were necessarily clumsy because I could not take advantage of any magnification directly, especially using the microscope; I had to concentrate on aligning the cam to get a picture, so I was constrained to watching the screen of the VCR, it being too low resolution for productive effort. I would like to have used an eyepiece adaptor that fits both the camcorder and the ‘scope; then I should have been able to peer through the other eyepiece. So be assured it is a great deal easier than I make it look here. I have to admit that relatively few people have access to a stereo microscope; I paid around £180 ( ebay ) for this Russian made Lomo MBC-10, so at least it has been useful apart from being a toy.
I use a Yihua [ goes under several trade names ] workstation that has a heater blower – like a hair drier but hotter and more concentrated flow of air – and a soldering iron that has, as an accessory, a very fine, needle point bit, allowing you to make a good job of such tiny amounts of solder, almost too small to see with the naked eye.
The VX1000 mic/remote/cp flexiboard cable is about 1cm wide; with only a “normal” fine point soldering bit 40 joints were made in the space of approx 0.9 sq cm. The much finer bit was/is available as an optional accessory.
See this video for demonstration of USB microscope: “ToddFun.com: USB Microscope Review”.
Mario Parodi [ Guitar ] plays:-
Albeniz: Rumores de la Caleta; SE-Op 165 – Malaguena
Brahms: Cradle Song Op 49 no 4
Debussy: Arabesca No 1; SB – Clair de lune
By from -
By from -
