China Manufacturer for FEP Encapsulated O-Ring to Netherlands Manufacturer
China Manufacturer for FEP Encapsulated O-Ring to Netherlands Manufacturer Detail:
Encapsulated O Ring adopts special rubber resisting high temperature, F+ plastic and special engineering to compound this sealing product. It not only has low contraction permanent set functions of rubber O Ring, but also resistant heat, cold oil, friction, chemical corrusion and other performances. It can be used in all kind of dynamical seal and static seal widely, meanwhile can replace all traditional rubber and plastic O Ring.
Technical Data Sheet
|
Property |
Unit |
Result |
|||
|
A |
B |
C |
|||
|
Normal Conditions |
Hardness |
JIS Hs |
70~90 |
70~90 |
60~75 |
|
Elongations(min.) |
% |
60 |
60 |
80 |
|
|
Tensile Stress(min) |
Mpa |
16 |
16 |
16 |
|
|
Compressibility |
% |
50~60 |
50~60 |
60~75 |
|
|
Recovery |
% |
＞85 |
＞85 |
＞70 |
|
|
Permanentset |
% |
＜10 |
＜10 |
＜10 |
|
|
230°Cx24h hot air ageing |
Change of hardness(max) |
JIS Hs |
-5~+5 |
-5~+5 |
-5~+5 |
|
Change of Tensile Stress(max) |
% |
-15 |
-15 |
-15 |
|
|
Change of Elongation(max) |
% |
-20 |
-20 |
-20 |
|
|
Compression Permanentset |
175°Cx70h |
% |
≤20 |
≤20 |
≤20 |
|
Color |
|
|
Brown |
Black |
Red |
|
Applications |
Temperature Limited |
℃ |
-20~+250 |
-20~+200 |
-20~+200 |
|
Pressure Limited |
Mpa |
0~35 |
|||
|
Working Environment |
|
Strong Caustics, moderate acids, chlorine, gases, water, steam, hydrocarbons, hydrogen and aluminum fluoride except element fluorine and fusion sodium. |
|||
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
What Is A PTFE Ring Gasket?
China Manufacturer for FEP Encapsulated O-Ring to Netherlands Manufacturer, The product will supply to all over the world, such as: , , ,
A&M HW100 fill valve leak repair.
If you have a leaky cylinder you should contact A&M, who should repair it under warranty.
If you find your A&M cylinder is leaking from the fill port then you can either replace the O ring on the little plunger inside the valve or you can convert it to a simple M10* countersunk bolt with an O ring seal. The O rings and bolts can be bought on eBay or your local DIY store.
*It has come to my attention that A&M use a number of different sizes of bolts in their fill valves so you will need to measure yours to make sure you are buying the correct size bolt and O ring.
www.xtxair.com
If you have a leaky cylinder you should contact A&M, who should repair it under warranty.
By from -
By from -
