Customized Supplier for PTFE Graphite Packing with Aramid Corner Supply to Honduras
Customized Supplier for PTFE Graphite Packing with Aramid Corner Supply to Honduras Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
O-Ring Sizes for Industrial Applications
Customized Supplier for PTFE Graphite Packing with Aramid Corner Supply to Honduras, The product will supply to all over the world, such as: , , ,
Quickly and easily change an I bar sealing wire! Each I bar sealer comes with two replacement sealing wires and two sets of replacement Teflon tape strips. Use this video for instructions on how to change a sealing wire for your I bar sealer. Wire replacement should take 10-15 minutes and each wire should last for several thousands of seals with the proper temperature settings. Call us (1-800-441-5090) if you have any questions or order an I Bar shrink wrap machine at: https://www.uspackagingandwrapping.com/Shrink-Wrap-Machines/I-Bar-Sealers/
By from -
By from -
