High Quality Expanded PTFE Tape to Salt Lake City Manufacturers
High Quality Expanded PTFE Tape to Salt Lake City Manufacturers Detail:
Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.
Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.
Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.
l Easy use and replacement
l Wide service scope.
Technical Data Sheet
|
No.
|
Project |
Technical Indexes |
|
1 |
PH Range |
0-14 |
|
2 |
Density |
0.7-0.8g/cm3 |
|
3 |
Temperature resistance |
-260-+260℃ |
|
4 |
High pressure resistance |
20~25Mpa |
|
5 |
Elongation |
20~30% |
|
6 |
Tensile strength |
30~35Mpa |
Regular Size
|
NO. |
SIZE |
NO. |
SIZE |
|
1 |
3mm*1.5mm*30m |
15 |
16mm*4mm*10m |
|
2 |
3mm*2mm*30m |
16 |
20mm*3mm*5m |
|
3 |
6mm*3mm*20m |
17 |
20mm*4mm*5m |
|
4 |
7mm*2.5mm*20m |
18 |
20mm*5mm*5m |
|
5 |
9mm*3mm*15m |
19 |
20mm*7mm*5m |
|
6 |
9mm*4mm*15m |
20 |
25mm*4mm*5m |
|
7 |
10mm*3mm*10m |
21 |
25mm*5mm*5m |
|
8 |
10mm*4mm*10m |
22 |
25mm*8mm*5m |
|
9 |
10mm*5mm*10m |
23 |
25mm*10mm*5m |
|
10 |
12mm*3mm*10m |
24 |
30mm*3mm*5m |
|
11 |
12mm*4mm*10m |
25 |
30mm*4mm*5m |
|
12 |
12mm*5mm*10m |
26 |
40mm*4mm*5m |
|
13 |
12mm*6mm*10m |
27 |
50mm*4mm*5m |
|
14 |
14mm*5mm*10m |
28 |
100mm*0.5mm*10m |
Application Area
It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
High Quality Expanded PTFE Tape to Salt Lake City Manufacturers, The product will supply to all over the world, such as: , , ,
Applications
The stick bag is a popular international packaging shape. It is also called pre-shaped bags, expansion bags. It is a novel form of packaging, diverse modeling, reliable measurement, seal firm, easy to use, and low cost packaging materials, etc.
It is widely used in dairy products such as milk, yogurt, lactic acid drinks, Japanese tofu, soy sauce, cooking oil, drinks, mineral water, cleaning supplies, alcohol, etc.
Features
It adopts 304 stainless steel, and PLC system control.
Chinese and English man-machine interface, Visualization operation
It adopts pressurized filling in airless. And it can avoid secondary pollution.
It is automatic entire process by PLC control system, such as filling, sealing, dropping bags, etc.
Unique filling nozzles design, no drip filling.
Unique sealing part, seal firm bag and avoid squeeze hand.
Main configuration
SUS304 stainless steel
WEINVIEW touch screen, MITSUBISHI PLC system, Other CHINT electrical equipment.
AIRTAC pneumatic components
Food – grade silicone tube
Selections help for plastic bag machine
Filling material viscosity
Standards: adopting sanitary centrifugal pump, mainly applied to low concentration liquid.
Viscous-type: adopting sanitary pneumatic forced pump, mainly applied to large viscosity liquid.
Bag material
Standards: BOPP laminated LDPE.
Special: PE or Nylon. It need add Teflon material in the sealed parts.
Filling accuracy ±1%
By from -
By from -
