Europe style for PTFE Graphite Braided Packing Export to Hungary
Europe style for PTFE Graphite Braided Packing Export to Hungary Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
2Mpa |
15Mpa |
15Mpa |
|
Shaft Speed |
14m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
0~14 |
||
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
What Is A PTFE Ring Gasket?
Europe style for PTFE Graphite Braided Packing Export to Hungary, The product will supply to all over the world, such as: , , ,
Quickly and easily change an I bar sealing wire! Each I bar sealer comes with two replacement sealing wires and two sets of replacement Teflon tape strips. Use this video for instructions on how to change a sealing wire for your I bar sealer. Wire replacement should take 10-15 minutes and each wire should last for several thousands of seals with the proper temperature settings. Call us (1-800-441-5090) if you have any questions or order an I Bar shrink wrap machine at: https://www.uspackagingandwrapping.com/Shrink-Wrap-Machines/I-Bar-Sealers/
By from -
By from -
