Factory Cheap PTFE Graphite Packing with Aramid Corner to Chile Factory
Factory Cheap PTFE Graphite Packing with Aramid Corner to Chile Factory Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Factory Cheap PTFE Graphite Packing with Aramid Corner to Chile Factory, The product will supply to all over the world, such as: , , ,
Circular knife cutting machine for cutting hoses into gaskets and o-rings. For hoses tubes with suitable material properties, the »CCM 4 Gasket« offers an excellent possibility to produce gaskets with a circular knife. Depending on requirements, with each cut a plurality of seals can be cut, so that the production is increased significantly.
Kreisschneidemaschine zum Schneiden von Flachdichtungen und O-Ringen. Für Schläuche mit geeigneten Materialeigenschaften bietet die »CCM 4 Gasket« eine exzellente Möglichkeit, Flachdichtungen mit dem Kreismesser zu schneiden. Je nach Anforderung werden bei jedem Schnitt gleich mehrere Dichtungen geschnitten, so dass die Produktion deutlich gesteigert wird.
By from -
By from -
