Factory directly provide Spiral Wound Gasket-R Export to Armenia
Factory directly provide Spiral Wound Gasket-R Export to Armenia Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
Factory directly provide Spiral Wound Gasket-R Export to Armenia, The product will supply to all over the world, such as: , , ,
**How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s More of my How to on SeaDoo below:
Ok! Seadoo GTX Carbon Ring Floating Ring Bellows Drive shaft replace fix leak carbone. OK! Same instructions for all 1997 97 Seadoo (Except XP and HX ) SP SPX GS GSI GSX GTS GTI. Steps: 1. Remove the O-Ring or Half Metal Ring on the Floating Ring. 2. Loosen up the clamps holding bellows and carbon ring. 3. Remove the nuts and bolts for steering and reverse. 4. Remove the 4 nuts or screw for the impeller housing. 5. You can now pull the Imp housing and drive shaft and all… 6. Use the video as a guide.
Check your internal fuel too! See 2 more Seadoo video links below:
1. How to repair Seadoo Beepers: https://youtu.be/pY-G6IX08pU 2. How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s
3. Clogged internal carb fuel filters. It was caused by the gray Tempo Fuel Lines. https://www.youtube.com/watch?v=0WdK7lTj
By from -
By from -
