Factory source manufacturing PTFE Graphite Packing with Aramid Corner to Moscow Manufacturers
Factory source manufacturing PTFE Graphite Packing with Aramid Corner to Moscow Manufacturers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
Factory source manufacturing PTFE Graphite Packing with Aramid Corner to Moscow Manufacturers, The product will supply to all over the world, such as: , , ,
By from -
By from -
