Manufacturer for Carbon Fiber Packing Impregnated with PTFE to Comoros Importers
Manufacturer for Carbon Fiber Packing Impregnated with PTFE to Comoros Importers Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
3Mpa |
10Mpa |
25Mpa |
Shaft Speed |
15m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
Manufacturer for Carbon Fiber Packing Impregnated with PTFE to Comoros Importers, The product will supply to all over the world, such as: , , ,
In part 28 of this series, Kent will illustrate (with a very good example) why you should not use RTV (silicone gasket maker) on sealing surfaces that are exposed to the inside of an engine. From his old days of working on aircraft he will show you the best sealant to use on gaskets.
In his “quick tip” video series Kent Bergsma shares short automotive maintenance tips and tricks that you may find helpful when repairing your own car. Each tip is one to two minutes in length, covers only one specific topic, and is geared for the do-it-yourself home mechanic. Using these tips can help protect you AND your car, and possibly save you hundreds of dollars $$$.
Check out all his videos in this Quick Tip series by watching the full play list highlighted on the home page of this channel or by going to this link https://www.youtube.com/watch?v=3kyizX5hNio&list=PLtRKk64pu2wqSt3egtiV2zacFs5YX7VuY
By from -
By from -